1062 10m probe with integral amplifier
PT2025 accessory
Description
Transverse & longitudinal fields, with 10m cable (other lengths upon request, up to 100m).
The integrated amplifier eliminates the requirement of a separate 1030 Amplifier, also allowing it to be used with a 2030 Multiplexer.
| Probe No. | Field Range (Tesla) |
Sample Type | Frequency Range (Mhz) | Active Volume (Dia. x Len., mm) |
| R1 | 0.043 to 0.13 | 1H | 1.9 to 5.6 | 7 x 4.5 |
| R2 | 0.09 to 0.26 | 1H | 3.8 to 11.2 | 5 x 4.5 |
| R3 | 0.17 to 0.52 | 1H | 7.5 to 22.5 | 4 x 4.5 |
| R4 | 0.35 to 1.05 | 1H | 15.0 to 45.0 | 4 x 4.5 |
| R5 | 0.70 to 2.1 | 1H | 30.0 to 90.0 | 4 x 4.5 |
| R6* | 1.5 to 3.4 | 2H | 7.5 to 22.5 | 4 x 4.5 |
| R7* | 3.0 to 6.8 | 2H | 15.0 to 45.0 | 4 x 4.5 |
| R8* | 6.0 to 13.7 | 2H | 30.0 to 90.0 | 4 x 4.5 |
* For 2H probes, the signal-to-noise ratio is low at the lower end of their frequency range.
1H probes:
• at min. of field range: approximately 10
• at max. of field range: approximately 100
2H probes:
• at min. of field range: approximately 5
• at max. of field range: not measured
